Support Portal

Support documentation and FAQs for all Prodigy Learning products including Certiport exams, GMetrix action learning / practice tests and learning solutions from CCI Learning, LearnKey, MeasureUp and Wiley. "Technical Tweets" from @plsupport will provide system updates.

Compass - Distribute Exam Content by LAN

Last Updated: Sep 18, 2019 10:36AM IST
The LAN Settings feature allows you to configure your Testing Machines (Compass Clients) to pull Exam Content and System Updates from a designated Machine (Compass Server), across a Local Network instead of having to get an Organisation Administrator to login to Compass then download and install Content/Updates to each machine individually.
 

Configuring a “Compass Server”:

Any machine can be designated as a Compass Server, as long as all of the other machines (Compass Clients) can "see" it on the network. It is possible to set this up on a Network Server but it is often best to configure a machine in each room/lab as a Compass Server. This allows better control of which exams are delivered in the lab/s. Also, Proctors/Test Centre Staff should be able to apply Exam Content/Updates. Configuring a Network Server as a Compass Server may mean that Proctors/Test Centre Staff would require IT Staff to apply Program Updates or that Proctors/Test Centre Staff are given access to the Network Server.

When configuring the "Server Address", we find it best to use an IP Address although you may use the machine name. If you do use an IP Address, please make sure that the Compass Server has a Static IP Address so that Compass Clients can consistently contact it.

Designate a Compass Server

To set a machine up as a Compass Server:
 
  1. Launch Compass and login as an Organisation Administrator
  2. Click on Settings in the menu on the left then scroll down to “LAN Settings” and select “Compass Server
 
  • The settings for Compass Server will default to the IP address of your currently leased local area connection and a pre-selected dynamic port number. It will also list any other actively assigned IP addresses from other connections if detected.
 
  1. Select the Server Address/Name that you wish to use for the Compass Server.
  2. Specify a Server Port number within the private range (49152 – 65535). The default Port is 52525.
  3. Scroll down to the bottom then click Save and Compass will restart itself. The “Test Connection” button will not function on a Compass Server - this is to test the connection to the Server from a Client.

*NOTE: Irrespective of whether you routinely use the Windows Firewall on your "Compass Server", you may have to create an Inbound Firewall Rule to Allow TCP connections on your chosen Port (i.e. 52525), in the Windows Firewall, so that "Compass Clients" are allowed to retrieve Exam Content from the "Compass Server".

*NOTE: The machine designated as the Compass Server must be powered on and contactable (connected to the network) while exams are being delivered.
 

Installing Exam Content or Performing Updates on the Compass Server

Once you have configured your Compass Server, it is best to download the Exam Content that you need/want before you install Compass on your Client machines. This way, all you need to do is install Compass on your Clients and, provided that the Compass Server is accessible, the CertiportNow Update Service will automatically check for and apply any available Content.

To install new Exam Content:
 
  1. Launch Compass and login as an Organisation Administrator
  2. Click on Manage Exams in the menu on the left then click on Download Additional Exams
  3. Scroll down the list and expand/select (tick the corresponding boxes) the Programmes/Exams as necessary
  4. Click Download Exams. Once you have installed the Content, restart Compass. 

Updates

Any available Exam/System Updates will present themselves on the Home page once you log in to Compass as an Organisation Administrator. If any are available, click on the respective button/s to install it/them.

Distributing Content/Updates

Once Compass and relevant Content/Updates have been setup/installed on the Compass Server, there are a few ways to distribute them to your Client Machines:
 
  1. While you are installing Compass on the Clients. If you are installing Compass with switches configured (see below), the Update Service will automatically check for and apply outstanding Content.
  2. While launching Compass. Compass will automatically check for and install outstanding updates from the Compass Server, anytime you launch Compass on a Client Machine. If you have recently updated the Server, launch Compass on the Clients at least 10 minutes before you want your candidates to login.
  3. Automatically with CertiportNow. Compass Updates are managed by the "CertiportNow" Service. By default, this service will check for updates every 24 hours (default time is set at time of installation - if you install Compass at 1pm, the service will check for updates everyday at 1pm) so long as the machine is powered on (Compass does not need to be running). You can change the time and/or frequency for this in Settings > Updates.
 

Configuring “Compass Client” Settings:


The settings for each of the Compass Clients simply need to match the Server Address and Server Port number specified on the Compass Server. To configure these manually, launch Compass, click on the Settings button (gear icon) and select “LAN Settings” then “Compass Client”:  
 
  1. Type in the Server Address of the Compass Server
  2. Type in the Server Port number specified in the Compass Server settings.
  3. Click the “Test Connection” button to verify communication.

Note: After configuring Compass, if the Client cannot find a path to the Server you will get a connection error.

On Multiple Machines:

To configure these settings across multiple machines, after designating a machine as a Compass Server (Save and restart), navigate back to LAN Settings and you can use the "Generate Script" button to generate a script that you can use to deploy Compass and these settings out to "Client" machines. This will save the script to the C:\Certiport\Compass Folder.

You can also configure your own script using it's built in Switches (see Compass - Additional/Optional Settings for more on this). For example, your Test Centre Account Name is "Test Boss" and your ID is 1234567. The Compass Server's IP address is 10.10.0.1 & you are using the default port 52525. Your Installation arguments would be something like:

Compass_Setup.exe /Silent Path="C:\Certiport\Compass" /TestCenterID 1234567 /CertiportID 1234567 /TestCenterName "Test Boss" /LanguageCode ENU /LanServer 10.10.0.1 /LanPort 52525

Contact Support

Upcoming Online Orientations

support@prodigylearning.com
http://assets3.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete